The Dallas figures
Angi's water damage restoration cost guide, updated September 11, 2026, includes a short table of city averages, and Dallas is on it. The range it gives for Dallas is $1,791 to $7,922, with an average of $4,788.
That runs higher than the national numbers on the same page. Angi puts the national average at $3,868, based on 1,500 verified projects reported by its pros, and says most homeowners pay between $1,383 and $6,369. The full national range it shows is $450 to $16,000.
An average covers everything from a wet hall closet to a soaked first floor, so use it to sanity check an estimate, not to price your house. Nobody can give you a real number until they have measured the wet area with a moisture meter.
| What needs fixing | Angi average cost, 2026 |
|---|---|
| Drywall | $300 to $850 |
| Ceiling | $450 to $1,600 |
| Roof | $400 to $2,000 |
| Flooring | $200 to $3,000 |
| Plumbing | $350 to $4,000 |
| Mold removal | $1,200 to $3,800 |
What makes one Dallas job cost more than another
Clean, gray or black water
The source of the water sets the price per square foot. Angi's averages are $3.50 for clean water, like a split supply line, $5.25 for gray water, like a washer overflow, and $7.50 for black water, which includes sewage. Black water costs more than twice as much because porous materials it touched get thrown out and everything that stays has to be disinfected. The sewage backup page covers that kind of job.
Hours before drying started
EPA guidance gives you a 24 to 48 hour window to get wet materials dry before mold becomes the worry. Every extra day lets the water climb higher in the drywall and deeper into the carpet pad and subfloor, which means more tear out. HomeAdvisor's guide also warns that clean water damage can quickly turn into a dirtier category. A leak found on a Friday night and left until Monday usually costs more than the same leak dried out that weekend.
What the house sits on
Dallas has plenty of both foundation types, and each adds its own costs. A slab leak usually means two bills: a plumber who locates and repairs the broken line under the concrete, and a restoration company to dry the floor and walls. On a pier and beam house, the crawl space has to be dried along with the rooms, which means more equipment and more days. In a two story house, or one with water lines or a water heater in the attic, a leak upstairs can soak a ceiling and the walls below it before anyone sees water.
Whether mold has started
Angi lists mold removal at $1,200 to $3,800 on top of the water work. In Texas, a hired mold job of 25 contiguous square feet or more needs a licensed mold assessor to write the plan and a separate licensed remediator to do the work, so a bigger mold job means two companies and two bills. The mold remediation page has the details.
Your share when insurance is involved
On a covered claim, your part of the bill is the deductible plus whatever the policy excludes. TDI defines the deductible as the amount of a claim you pay yourself, and notes that a policy can have a different deductible for each type of coverage. Look yours up on the declarations page before you need it.
Two other policy details move the number. TDI explains that replacement cost coverage pays to repair or replace at current prices, while actual cash value coverage pays replacement cost minus depreciation, the loss in value from wear and age. And if you have to move out while the house is repaired for a covered loss, additional living expenses coverage helps with rent, food and other extra costs, up to your policy's limit.
A couple of add-ons matter in Dallas. TDI's home insurance guide lists backup of sewers or drains, and damage to foundations or slabs, among the common endorsements. If you aren't sure whether you have them, ask your agent.
One rule to know before you hire anyone: TDI says Texas law makes it illegal for a contractor to offer to waive your deductible, and insurers are allowed to ask for a receipt or canceled check showing you paid it. Our insurance claims page covers the deadlines your insurer has to meet.
Getting estimates you can compare
- Ask for it in writing and itemized: the square footage, the equipment, and how many days it is expected to run.
- Ask whether moisture readings will be taken and logged at every visit, and whether you get a copy.
- Check whether the estimate covers drying only or the rebuild too. Two quotes are only comparable if they cover the same work.
- Ask whether they bill your insurer directly or bill you.
TDI suggests getting more than one bid and comparing them with the adjuster's report before you settle the claim. For what should happen on the job itself, see how water damage restoration works.
Sources: Angi water damage restoration cost guide, HomeAdvisor cost guide, EPA mold and moisture guide, Texas Occupations Code ch. 1958, TDLR mold FAQ, TDI home insurance guide, TDI, help after a storm, TDI, water damage and mold coverage. Checked .
Questions Dallas homeowners ask
How much does water damage restoration cost in Dallas?
In the September 2026 update of its cost guide, Angi lists Dallas at $1,791 to $7,922, with an average of $4,788. Its national average on the same page is $3,868. Your own job can land well outside that range, so get a written estimate based on moisture readings.
Is black water cleanup in Dallas priced differently?
Yes, by a lot. More of the house goes in the dumpster and whatever stays has to be disinfected. The CDC says drywall and insulation contaminated with sewage should be removed and discarded. Angi averages $7.50 a square foot for black water and $3.50 for clean water.
Will my insurance pay for the drying?
If the water came from something sudden and accidental, like a burst pipe, TDI says most homeowner policies cover the damage, less your deductible. Damage from gradual leaks or seepage usually isn't covered. Read your policy and call your insurer before permanent repairs start.